Beginning to Write
You will actually begin to write HTML starting with Primer #2.
That's tomorrow if you follow the seven-day plan this was written for.
Here, I want to tell you how you will go about the process.
You will write the HTML document on the word processor, or
Notepad, WordPad, or Simple Text. When you are finished creating the
HTML document, you'll then open the document in a browser, like Netscape
Navigator. The browser will interpret the HTML commands for you and
display the Web page.
Now, some people who are already schooled in HTML are going to
jump up and down and yell that you should be using an HTML assistant
program because it makes it easier. That's true, but it also makes it
harder to learn as the program does half the work for you. Take my word
for it, use the word processor for a week, then go to the assistant if
you still want to use one. You'll be far better off for the effort. I
have been writing HTML for six years and I still use Notepad for the
bulk of my writing.
Let's get into the programs you will use to write your HTML document.
Keep this in mind: HTML documents must be text only. When you save an
HTML document, you must save only the text, nothing else.
The reason I am pushing NotePad, WordPad, and Simple Text is that
they save in text-only format without your doing any additional work.
They just do it. But, if you're like me, then you will want to start
writing on a word processor, like WORD, or WordPerfect. Maybe you're
just more comfortable on it. If so, read this next part carefully.
The Word Processor
When you write to the word processor you will need to follow a few steps:
1. Write the page as you would any other document.
2. When you go to save the document (Here's the trick), ALWAYS choose SAVE AS.
3. When the SAVE AS box pops up, you will need to save the
page in a specific format. Look at the SAVE AS dialogue box when it
pops up: Usually at the bottom, you find where you will be able to
change the file format.
4. If you have a PC, save your document as ASCII TEXT DOS or just TEXT. Either one will work.
5. If you have a MAC, save your document as TEXT.
6. When I started writing HTML, I saved pages by assigning
every Web page its own floppy disc. It just helped me keep it all
straight, but if you want to save right to your hard drive, do it. I
only offer the floppy disc premise as a suggestion.
Please remember: It is very important to choose SAVE AS
EVERY time you save your document. If you don't, the program won't save
as TEXT, but rather in its default format. In layman's terms -- use SAVE
AS or screw up your document.
You see, when you save your document in WORD, or some other word
processor format other than text, you are saving much more than just the
letters on the page. You're saving the margin settings, the tab
settings, specific fonts, and a whole lot of other settings the page
needs to be displayed correctly. You don't want all of that. You just
want the text.
NotePad, WordPad, and SimpleText already save in text-only format
so if you use one of them as your word processor, you'll get the
correct format simply by saving your document.
How To Name Your Document
What you name your document is very
important. You must first give your document a name and then add a
suffix to it. That's the way everything works in HTML. You give a name
and then a suffix.
Follow this format to name your document:
1. Choose a name. Anything. If you have a PC not running Windows 95, you are limited to eight letters, however.
2. Add a suffix. For all HTML documents, you will add either ".htm" or ".html".
(".htm" for PCs running Windows 3.x and ".html" for MAC and Windows 95/98 Machines)
Example:
I am looking to name a document I just wrote
on a PC running Windows 3.11 for workgroups. I want to name the document
"fred". Thus the document must be named "fred.htm". If it was MAC or
Windows 95/98 I would name it "fred.html". Please notice the dot
(period) before .htm and .html. And no quotation marks, I just put them
in here to set the name apart.
Uhhhhhh.... Why Do I Do That?
Glad you asked. It's a thing called
"association." It's how computers tell different file types apart.
".html" tells the computer that this file is an HTML document. When we
get into graphics, you'll see a different suffix. All files used on the
Web will follow the format of "name.suffix." Always.
Okay, why .htm for PCs running Windows 3.x and .html for MAC and Windows 95/98?
Because that's the way the operating systems are made (Windows
3.x, Windows 95/98, and MAC OS are all technically called operating
systems). Windows 3.x only allows three letters after the dot. MAC OS
and Windows 95/98 allow four, or more. Your browser allows for both
suffixes. It acts upon .html and .htm in the same fashion.
Why do you keep harping on the fact that I must save in TEXT only?
You're just full of questions! You
see, HTML browsers can only read text. Look at your keyboard. See the
letters and numbers and little signs like % and @ and *? There are 128
in all (read upper- and lowercase letters as two). That's text. That's
what the browser reads. It simply doesn't understand anything else.
If you'd like to test this theory, then go ahead and create an
HTML document and save it in WORD. Then try and open it in your browser.
Nothing will happen. Go ahead and try it. You won't hurt anything.
Remember that if you are using Notepad, Wordpad, or Simple Text,
the document will be saved as text with no extra prompting. Just choose
SAVE.
Opening the Document in the Browser
Once you have your HTML document on
the floppy disc or your hard drive, you'll need to open it up in the
browser. It's easy enough. Since you're using a browser to look at this
Primer, follow along.
1. Under the FILE menu at the very top left of this screen, you'll find OPEN, OPEN FILE, OPEN DOCUMENT, or words to that effect.
2. Click on it. Some browsers give you the dialogue box
that allows you to find your document right away. Internet Explorer, and
later versions of Netscape Navigator, require you to click on a BROWSE
button or OPEN FILE button to get the dialogue box. When the dialogue
box opens up, switch to the A:\ drive (or the floppy disc for MAC users)
and open your document. If you saved the file to your hard drive, get
it from there.
3. You might have to then click an OK button. The browser will do the rest.
One More Thing
You easily have enough to keep you occupied for the first day. Don't worry, the Primers get less wordy after this.
If you are going to start writing HTML, I suggest you make a
point of learning to look at other authors' HTML pages. You say you're
already doing that, right? Maybe. What I mean is for you to look at the
HTML document a person wrote to present the page you are looking at.
Don't look at the pretty page, look behind it at the HTML document.
Why Would I Do That?
Because you can... but seriously, folks. Let's say you run into a
page that has a really neat layout, or a fancy text pattern, or a
strange grouping of pictures. You'd like to know how to do it.
Well, look, I'm not telling you to steal anything, but let's be
honest, if you see some landscaping you like, you're going to use the
idea. If you see a room layout you like, you will use the idea to help
yourself. That's the point of looking at another page's HTML document. I
think it's also the best way to learn HTML. In fact, I am self-taught
in HTML simply by looking at others' documents. It was the long way
around, believe me. You're going to have a much easier time of it with
these Primers.
Here's how you look at an HTML document (known as the "source code"):
1. When you find a page you like, click on VIEW at the top of the screen.
2. Choose DOCUMENT SOURCE from the menu. Sometimes it only reads SOURCE.
3. The HTML document will appear on the screen.
4. Go ahead. Try it with this page. Click on VIEW and then choose the SOURCE.
It's going to look like chicken-scratch right now, but by the end
of the week, it'll be readable and you'll be able to find exactly how a
certain HTML presentation was performed.
It's A Little Different On AOL
Those of you who use AOL can also see the source. You can do it
by placing your pointer on the page, off of an image, and clicking the
right mouse button. MAC users should click and hold. A small menu should
pop up. One of the items will allow you the ability to view the source.
That's the Primer for today. Print it out if you'd like and get
ready to delve in and write your first HTML document. See you tomorrow.
No comments:
Post a Comment